Standing seam and metal panel roofing, roof repair and full replacement in Elma. We show up when we say we will, and we clean up before we go.
Metal roofing is our specialty, but shingles, gutters, soffit and leak work all get the same attention in Elma.
A skylight has to be woven into the roof, not caulked to it. That is the difference between a fix that lasts a season and one that holds.
The edge of a roof is where most trouble starts. New fascia, new soffit, wrapped or painted so it stays sound.
After a storm we walk the roof, photograph everything we find, and write an itemized estimate you can hand straight to your adjuster.
This is the work our name is attached to. Two decades of tin roofs on houses, churches, barns and additions, installed by crews who cut the trim on site instead of forcing something that almost fits.
Water runs along decking and rafters before it ever drips, so the stain is rarely under the hole. We trace the leak back to where it really starts and fix that.
Steam and hand work, never a hammer and chisel on your roof. Then we check the eaves for the damage the ice already did.
An older roof deserves to keep its character. We repair rather than replace wherever the material still allows it.
A twenty year old panel roof usually needs fasteners and sealant, not replacement. We refasten with new washers and get you another long stretch out of it.
Missing shingles get matched as close as weathering allows. Loose metal gets new fasteners and washers, and the eaves, rakes and ridge get sealed back up tight.
Lifted panels, missing shingles, flashing that has given up where the chimney comes through. We find what is actually wrong, fix that, and leave the rest of your roof alone.
Repair or replace, we handle both, and we work from what the roof actually needs rather than from what an adjuster might approve.
The layer you never see is what keeps water out on the ugly days. We do not thin it out to save a few dollars on a bid.
Coatings for low slope and older metal roofs that are still sound but weathered. Washed down, refastened, primed at the rust, then coated.
A limb through the roof or panels peeled back overnight needs covering now, not next week. We get it dried in first so the inside of the house stops taking damage.
Guards installed as part of a roof job or on their own. Either way we check the hangers and the pitch while we are up there.
When a roof is genuinely finished we replace it, and we say so plainly rather than dressing it up. Metal and shingle priced side by side so you can compare real numbers.
Inspections come free with an estimate. We would rather find the small problem this spring than replace a ceiling for you next winter.
We still shingle plenty of roofs. Cracked, curled and blown off shingles get replaced, and the valleys and flashing get reworked while we are up there.
Porch roofs, additions and low slope sections that hold water instead of shedding it. We rework the flashing, seal the seams, and get water moving again.
Churches, shops, barns and small commercial buildings. We have roofed everything from a wood shed to a steeple.
Our crews in Elma work the way this family has always worked — on time, cleaned up, and finished before anybody calls it finished. You will know who is coming, what day they are coming, and what the number is before anything starts.
If weather moves your Elma job, we call you. If we open the roof and find rotten decking, we show you the boards and price the change before we touch it. Nobody likes surprises on a roof, us included.
Here is what Elma homeowners tell us makes the difference.
The same family started this company putting metal roofs on neighbors houses in 2002. It has never been sold, franchised or handed off to a call center.
You get a start date and we hold to it. If weather moves your job we call you, rather than leaving you watching the driveway.
Somebody comes out, measures, gets on the roof, and leaves you a written price. No charge, no obligation, and no number that expires if you do not sign today.
Around twenty standard metal colors, and the chart comes out with the estimate so you can hold it up against your siding and shutters before you commit.
Standing seam and metal panel roofs are the work we are known for. Color, trim, fastening pattern — we have done hundreds and we will walk you through all of it.
The questions that come up on just about every estimate we write.
Much less than people expect. Over solid decking with underlayment under it, a Elma metal roof sounds about like a shingle roof from inside the house. The loud tin roof people remember was screwed straight to open purlins over a barn with nothing underneath.
Sometimes. If the decking is sound and there is only one layer of shingles, a Elma metal roof can go over the top on purlins. If there is rot underneath or two layers already on, we tear off first — and we will tell you that before you sign, not halfway through.
Most Elma metal roof jobs land somewhere between about $12,000 and $30,000 in 2026, depending on square footage, pitch, panel type and how much tear off there is. Standing seam runs higher than exposed fastener panels. We measure before we quote, and the estimate is free.
A typical Elma shingle roof runs roughly $8,000 to $18,000 in 2026 for an average single family home, and more if the deck has rot or the roof is steep and cut up with dormers. We do not price off a satellite photo — somebody comes out and measures.
No. Estimates are always free in Elma. We come out, measure, look in the attic if we can get to it, and leave you a written price. Nobody will push you to sign anything that day, and the number does not expire in an hour.
Yes. Gutters, guards, soffit and fascia are all part of keeping the edge of a Elma roof dry, so we handle them along with the roof instead of sending you off to find somebody else to finish the job.
Real feedback from homeowners whose roofs we have worked on.
"They found a leak two other roofers could not. Turned out to be the chimney flashing, not the roof at all. Fixed in one afternoon and it has been dry ever since."
"Thank you so much to the entire crew at Roofing Brothers for our amazing new tin roof! You were amazing to work with and I couldn't recommend you to others enough! Great communication, pricing, color options, efficiency, and HONESTY! If anyone needs a new roof, I highly recommend this crew! Phenomenal job."
"Our church needed a new roof and the budget was tight. They worked with us on it, did beautiful work, and finished before the fall revival."
Roofing Brothers also serves these towns near Elma.